Wall Mounted Residential Mini Ozone Water Purifiers for Operating
TECHNICAL SPECIFICATION TABLE
|Input: AC 100-240V/50-60Hz|
Output: DC 12V 3A 36W
0.4 ~ 0.6 mg /L
Minimum:10 psi Maximum:75psi
ECO Laundry is an environmentally friendly appliance intended for
using in a residential washing machine.
ECO Laundry is designed to work with your washing machine, mixed
active oxygen and silver ions into the water.The processed water
can wash clothes cleanly and kill bacteria on clothes without
leaving any residual detergent.
ECO Laundryhas the main functions as below:
Sterilization and disinfection;
Decontamination and purification;
Clean and softening;
Energy conservation and environmental protection
The operation of ECO Laundry is easy and convenient. As long as you
install ECO Laundry properly, you simply need to operate your
washing machine following manufacturer’s operation instructions.
ECO Laundry will start working automatically when the washing
machine starts to work, and it will automatically turn off when the
washing machine stops operation.
USE & SAFETY CONSIDERATION
Before using, please read the User’s Manual carefully.
Disconnect ALL power before servicing.
Do not operate the unit with the cover removed.
Maximum water inlet pressure is 75psi.
Use the supplied new hose when connect the ECO Laundry unit to your
washing machine. You should replace any existing washing machine
hose that is more than 2 years old, with a new one.
To prevent leakage caused by back-flow from the washing machine, do
not leave your water hose disconnected. Simply turn the water off
at the valve / faucet on the wall, leaving the hose connected.
Use a soft cloth dampened with water. Do not clean your ECO Laundry
with harsh chemicals, abrasives or cleansers.
Do not mount the ECO Laundry unit vertically or at an angle.
ECO Laundry is designed for residential use only and is not
intended for use in a commercial or industrial setting.
ECO Laundry can work normally in the temperature category 0℃~78℃,
without components breakdown.
ECO Laundry-P- PCO
ECO Laundry-P- PCB
ECO Laundry-P- OM
ECO Laundry requires 120Volt 60Hz power on a 15amp fuse or Circuit
A dedicated electrical circuit, equipped with an approved GFCI
outlet, is recommended for supplying power to your ECO Laundry.
NEVER use an extension cord or a power adapter other than the one
provided with ECO Laundry.
Water pressure of 10 to 75psi is required to correctly operate your
To avoid the possibility of water damage (i.e. a hose leak) it is
recommended that you always turn off the water supply
valves/faucets when the washing machine is not in use.
Water quality may affect the performance of your ECO Laundry. If
you have water quality concerns, such as high content, consult a
water filtration expert.
1. The ECO Laundry should be fastened to the wall, just above and
behind your washing machine. It is recommended that the mounting
hole on the right side of the ECO Laundry (above the water
inlet/outlet) be mounted to a wall stud, if possible. Two sets of
mounting screws are included. If it is not possible to mount the
ECO Laundry to wall studs, you should use “molly”type expandable
screw anchors, available at your local hardware store.
2. Remove the cover from your ECO Laundry unit by pressing the tabs
on the side in, lifting up one inch, and then straight out. Using a
carpenter’s level to ensure the unit is mounted level mark the
location of the two mounting holes on the wall with a pencil. Drill
appropriate sized holes for the screws or mollys in each marked
location. Install the two screws leaving them protruding from the
wall by about one inch.
3. Place the ECO Laundry against the wall so that the protruding
screws slip through the mounting “keyholes”of the unit. Gently
slide the unit down into the lock position of the keyholes. You can
now tighten the screws against the housing of the unit. DO NOT over
tighten as it may cause damage to the back of the unit.
4. Connect the cold water hose to the water outlet on the ECO
Laundry. Check that the rubber washer in the hose is in place and
properly tighten the hose, but DO NOT over tighten.
5. With the supplied hose, connect the water inlet on the ECO
Laundry to the cold water supply faucet. Make sure rubber washers
are in place and properly tighten, but DO NOT over tighten.
6. Replace the cover on the ECO Laundry by placing one inch over
the tabs and sliding down until it locks.
System Set Up
1.Turn on the water valve/faucet. Check the connections to ensure
that there is no leakage or dripping. Tighten the hose connections,
if necessary, but DO NOT over tight.
2.Connect power adapter, and then start your washer. Once the water
begins to flow, the blue light of the ECO Laundry should begin to
glow and your washing machine will begin to run through the normal
INDICATORS AND ALARM SYSTEM
The Indicator light, viewed through the window in the front of the
ECO Laundry has two states of operation.
A blue light indicates the normal operating condition of ECO
A flashing red light indicates the fan or ozone generator is not
operating properly. Pls contact our service team for service.
Your ECO Laundry is equipped with an internal leak detector. If a
leak happens to develop on the inside of the unit, the water will
accumulate on the bottom panel. The sensor will set off an audible
alarm and will automatically turn the unit off. This alarm will
continue to buzz until the leak is stopped and/or the unit is
unplugged. If this alarm should occur, you should unplug the unit,
turn off the cold water valve and call our Customer Service team
DAILY USE OF ECO LAUNDRY
The use of ECO Laundry is very easy after installed and connected
properly. You just need to operate your washer according to the
instruction provided by the manufacturer of your washer.
Non-use or Vacation Care
Operate your washer and ECO Laundry only when you are at home. If
you are on vacation or won’t be using your washer for an extended
period of time, you should unplug the power supplies to both the
washer and ECO Laundry and turn off the water supply. This helps
avoid accidental flooding due to a water pressure surge while you
For some serious or special stains, we suggest that you pre-treat
them, just as you did before. For normally soiled laundry, you may
not need to use any detergent powder or other detergent.
FREQUENTLY ASKED QUESTIONS
Do tough stains have to be pretreated?
We recommend that you continue to treat stains in the same manner
as always. Tough stains should be pre-treated in the same fashion
as before using the ECO Laundry. For normally soiled laundry, the
use of the ECO Laundry will allow you to use less detergent or no
detergent at all.
Does ECO Laundry work with all forms of water?
ECO Laundry will work with all household water qualities, but the
better the incoming water quality the better the results you will
have. If you use hard water, we recommend that you use a water
softener for hard water and/ or a pre-filter for chlorine.
What types of washing machines can work with ECO Laundry?
ECO Laundry can be used with all almost any residential machine.
There are however two separate models. The High-flow ECO Laundry is
designed for most top load washers that have no restriction in
their water intake. The Low-Flow ECO Laundry is designed for front
load washing machines or those that have a restriction in their
cold water intake. (High Efficiency Washer)
Will the ECO Laundry work with Commercial Washing Machines?
ECO Laundry is designed and recommended for residential use only,
not for any commercial or industrial applications.
Is ECO Laundry only used with washing machine?
Yes, the treated water by ECO Laundry is only used to launder
clothes. The water from your ECO Laundry is not intended for
drinking or ingesting.
Your ECO Laundry is warranted to be free from all defects in
material and workmanship in normal household use for a period of
(1) year from date of purchase.
The warranty is granted only to the original purchaser and members
of his or her immediate household. The warranty is subject to the
following provisions. Any damages or malfunctions caused by
negligence, abuse, or use not in accordance with the Owner’s Manual
are not covered by this warranty. Likewise, any defects or damages
caused by unauthorized service or the use of other than Genuine
Wowtech parts are not covered.
Wowtech will, at its option, repair or replace a defective ECO
Laundry or part(s) for the ECO Laundry that is covered by this
warranty. As a matter of warranty policy, Wowtech will not refund
the customer’s purchase price. Please recorder the following
Warranty Card when you purchase the unit from Wowtech or the
To obtain warranty service you must return the defective ECO
Laundry or ECO Laundry parts along with proof of purchase to
Wowtech or Wowtech Authorized Warranty Station. All transportation
charges on parts, or units, submitted under this Warranty shall be
borne by purchaser. Unless this Warranty is expressly renewed or
extended by Wowtech, any repaired or replaced part of unit shall be
warranted to the original purchaser only for the length of the
unexpired portion of the original warranty.
Please contact us without hesitation if you need help.